NetworkHelper Removal [Explained]

NetworkHelper is a browser hijacker that targets Mac computers

NetworkHelper is a Mac browser hijacker, also referred to as a redirect virus. Hijackers are not thought to be severe infections since they don’t aim to cause harm. It’s not benign, however, since its primary intention is to generate traffic and profit for certain sites. Hijackers use pretty sly methods to install but once they are in, they’re very obvious infections. You’ll notice your browser acting weirdly, like redirects to random pages, search results with sponsored content mixed in, etc. But some people might not realize the bizarre behaviour points to a redirect virus if they don’t know what they’re. The situation normally becomes clear when users google the website they’re constantly redirected to, and the signs.

NetworkHelper

The hijacker will not only lead you to strange sites, but will also modify browser’s settings. Every time you launch it, you browser will have a different homepage/new tabs, which may be hard to reverse. By changing your browser’s settings, hijackers are able to redirect you.

It should be said that hijackers can’t install by themselves because they aren’t malicious software. Users usually permit them to install, though they generally do not even notice it. The hijackers, among other pests like adware and potentially unwanted programs (PUPs), employ the bundling method to install, which is basically attaching them to freeware as additional offers allowing them to install alongside. We will clarify how you can avoid installing the unnecessary programs in the proceeding section of the article, so do continue reading.

We advise you eliminate NetworkHelper promptly, even if it’s not the most severe infection. Your usual browsing might be interrupted by the hijacker but it might also expose you to dangerous content like malware and scams.

Ways NetworkHelper installs

Freeware is commonly the reason behind browser hijacker installations. They are often attached to known free programs as additional offers, and this is referred to as program bundling. Program bundling hides the additional items from users, unless they pick certain settings, and they’re set to install alongside. Preventing these undesirable installations should not cause any trouble if you pay attention to program installation.

During free software installation, it is important to opt for Advanced (Custom) settings. If you use Default mode, you won’t see the items. Advanced settings will make the offers visible, and you’ll have the option of unchecking all of them. It’s enough to just uncheck those boxes. If you avoid undesirable installations from the very beginning, you won’t have to spend a long time with threat removal later on. In addition, if you’re attentive during software installation, your device will have little to no worthless programs.

Is the NetworkHelper dangerous

Since they take over popular browsers like Safari, Google Chrome or Mozilla Firefox, and then redirect you to random web pages, you’ll see a redirect virus threat immediately. The hijacker will make alterations to your browser’s settings so that your homepage is set to its advertised web page, and whenever your browser is opened, that’s the web page you will see. An additional change made to your browser is your search engine. Every time you use your browser address bar to search, you’ll be redirected to a web page the hijacker is promoting and then get your search results. Sponsored content will be added among the valid results. Hijackers intend to redirect users to sponsored web pages so they could generate traffic and income. Bear in mind that unknown redirects aren’t only annoying but also potentially harmful. Until the hijacker is removed, it isn’t recommended to interact with any sponsored or advertisement content. You may be led to dangerous sponsored pages because hijackers do not review whether they are safe. You may be redirected to a malicious software-infected web pages, or one that’s trying to scam you. Hijackers aren’t especially malicious but you shouldn’t allow them to stay installed either.

It may not be instantly noticeable, but hijackers also spy on you, they gather data about what you search for, content you interact with, what type of pages you visit, your IP address and all kinds of other data. We doubt that you want the hijacker to spy on you, let alone allow it to share the information with unknown third-parties.

Overall, the hijacker installed on your Mac without your authorization, made undesired browser setting modifications, started leading you to sponsored web pages for revenue, and possibly subjected you to dubious content. Because of this, don’t wait to remove NetworkHelper.

How to uninstall NetworkHelper from your Mac

It is strongly suggested to use anti-spyware software to uninstall NetworkHelper because that is the easiest way. The software would take care of everything and ensure the threat is no longer present on the system. However, we don’t dissuade you from trying manual NetworkHelper elimination, if you understand what you’re doing. You could modify your browser’s settings back to normal after you uninstall NetworkHelper.

Offers

You can find more information about WiperSoft on its official website, and find its uninstallation instructions here. Before installing, please familiarize yourself with WiperSoft EULA and Privacy Policy. WiperSoft will detect malware for free and gives Free trail to remove it.

  • WiperSoft

    WiperSoft is an anti-virus program with real-time threat detection and malware removal features. It detects all types of computer threats, from adware and browser hijackers to trojans, and easily removes them.

    Download|more
  • Combo Cleaner

    ComboCleaner is an anti-virus and system optimization program for Mac computers. The program will keep your Mac secure from different types of malware, as well as clean it to keep it running smoothly.

    Download|more
  • MalwareBytes

    Malwarebytes is a powerful anti-virus program that detects and removes all types of malware, as well as less serious threats like adware and browser hijackers. It has both free and paid versions.

    Download|more

Automatic NetworkHelper removal

We advise using security software like anti-spyware for NetworkHelper removal because it is the easiest. Anti-spyware should delete NetworkHelper because it is developed to deal with such infections. Simply download the software, carry out a scan, and delete NetworkHelper. However, it’s also possible to remove NetworkHelper manually, and the below provided instructions will explain how.

Remove NetworkHelper from Windows manually

Windows XP

  1. Click Start (the windows logo bottom-left corner of the screen) or press the window key on your keyboard, pick Settings and then Control Panel.
    NetworkHelper
  2. Choose Add or Remove Programs.
  3. Uninstall NetworkHelper.
    NetworkHelper
  4. Check all installed programs for other dubious programs and delete them.

Windows 7

  1. Press the windows key to access start menu and select Control Panel.
    NetworkHelper
  2. Select Programs and Features and then Uninstall a program.
    NetworkHelper
  3. Find NetworkHelper and uninstall it.
    NetworkHelper
  4. Look through all programs installed on your system for other questionable applications and remove them.

Windows 8/10

  1. Right-click on Start and select Programs and Features.
    NetworkHelper
  2. Uninstall NetworkHelper.
    NetworkHelper
  3. Do the same to all additional unfamiliar programs.

How to manually remove NetworkHelper from Mac OS

Removing NetworkHelper from a Mac computer is rather simple. But we will also guide you through deleting some leftover files after NetworkHelper removal.

  1. Press on Finder (the first icon from the left on your dock) and press on Applications.
    NetworkHelper
  2. Drag NetworkHelper into the trash.
    NetworkHelper
  3. It is also suggested to go through all other applications to see if anything else causes suspicion.
  4. Click Go located on the menu bar and then Go to Folder.
    NetworkHelper
  5. Type /Library/LaunchAgents, and drag any questionable files to the trash.
    NetworkHelper
  6. Open Go to Folder again, and type /Library/Application Support. Drag all suspicious files to the trash.
    NetworkHelper
  7. Go back to Go to Folder, and put in ~/Library/LaunchAgents. Drag any questionable files to the trash.
    NetworkHelper
  8. Go back to Go to Folder, and put in /Library/LaunchDaemons. Search for any recently-added or otherwise questionable files and put them in the trash.
  9. Do not forget to empty the trash which you may do by right-clicking on the trash icon and clicking Empty Trash.
    NetworkHelper

How to remove NetworkHelper from your Internet browser

Remove NetworkHelper from Internet Explorer

  1. Open Internet Explorer.
  2. Click the gear icon located at the top-right corner, and select Manage Add-ons.
    NetworkHelper
  3. Click Remove on NetworkHelper and all extensions you’re unfamiliar with.
  4. Access Internet Options by pressing the gear icon and selecting Internet Options.
  5. You will be able to modify your homepage to your preferred web page in the General tab.
    NetworkHelper
  6. Click the gear icon (top-right corner), and click on Manage Add-ons.
    NetworkHelper
  7. Access Search Providers (from the left side menu), remove the NetworkHelper set one and pick one of your preference.

If NetworkHelper is still giving you problems, resetting your browser settings might be necessary.

  1. If you’re using Windows XP, Start – Run, type in inetcpl.cpl, open Advanced and click Reset.
    NetworkHelper
  2. For users using computers running Windows Vista/7, press the windows logo, type inetcpl.cpl in the search box and press Enter. Open the Advanced tab and press Reset.
  3. For users using computers running Windows 8/10, open Internet Explorer, click the gear icon, press on Internet Options, proceed to the Advanced tab and press Reset. Confirm the reset by clicking Reset again.
    NetworkHelper

Uninstall NetworkHelper from Google Chrome

  1. Launch Google Chrome.
  2. Click the three dots at the top-right corner, then More tools and Extensions.
    NetworkHelper
  3. Identify all extensions you cannot identify, as well as NetworkHelper, and delete them.
    NetworkHelper
  4. Open Settings via the menu (the three dots top right-corner).
    NetworkHelper
  5. Access On startup, you will see a homepage set by NetworkHelper, change it to one of your preference.
    NetworkHelper
  6. Access the Search engine section from the menu on the left, click Manage search engines, change your search engine.
    NetworkHelper

In case NetworkHelper is still present, your browser’s settings may need to be restored to default.

  1. Launch Google Chrome, menu (the three dots) – Settings.
    NetworkHelper
  2. Go down, press on Advanced and go down to the Reset section.
    NetworkHelper
  3. Press Reset and then confirm your choice by pressing Reset again.
    NetworkHelper

NetworkHelper deletion from Mozilla Firefox

  1. Launch Mozilla Firefox.
  2. Access Add-ons through the menu (the three bars top-right corner).
    NetworkHelper
  3. Access Extensions, identify all unknown extensions, as well as NetworkHelper, and delete them.
    NetworkHelper
  4. Menu (the three bars) – Preferences.
    NetworkHelper
  5. If you go to the Home tab, you’ll see a homepage set by NetworkHelper, change it to one you prefer.
    NetworkHelper
  6. Go to the Search tab from the menu on the left, modify your search engine.

In case you’re still struggling with NetworkHelper, it might be necessary to restore your browser’s settings to default.

  1. Menu (the three bars) – Help – Troubleshoot information.
    NetworkHelper
  2. In the new window, click on Refresh Firefox.
  3. Press Refresh Firefox again.
    NetworkHelper

NetworkHelper deletion from Safari

  1. Launch Safari.
  2. Safari (from the menu bar at the top) – Preferences.
    NetworkHelper
  3. Access the Extensions tab, find and delete NetworkHelper, as well as any other extension you do not recognise.
    NetworkHelper
  4. In the General tab, set the homepage of your preference instead of the one set by NetworkHelper.
    NetworkHelper
  5. Open the Search tab, modify your search engine.

Resetting your browser’s settings will probably be necessary if NetworkHelper is still giving you issues.

  1. Clear History by clicking on Safari (the menu bar) when the browser is running, and click on Clear History.
    NetworkHelper
  2. Click Safari (from the top menu) again – Preferences – Advanced tab.
    NetworkHelper
  3. Check the box at the bottom that says Show Develop menu in the menu bar box.
    NetworkHelper
  4. Click on Develop (on the menu bar) and then on Empty Caches.

How to remove NetworkHelper from Microsoft Edge

  1. Launch Microsoft Edge.
  2. Menu (the three dots at the top-right corner) – Extensions.
    NetworkHelper
  3. Locate all unfamiliar extensions, as well as NetworkHelper, and delete them.
  4. Access Settings via the menu (the three dots).
  5. In the On startup tab, set the homepage of your choice instead of the one set by NetworkHelper.
    NetworkHelper
  6. Access the Privacy and services tab, change your search engine from the one set by NetworkHelper to something of your choice.
    NetworkHelper

In case NetworkHelper is still present, your browser’s settings might need to be restored to default.

  1. Open Microsoft Edge menu (the three dots) – Settings – Reset settings.
  2. Press on Restore settings to their default values. Confirm the reset.
    NetworkHelper

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *